User Guide

User Guide

Make sure the table lighter is never in direct touch with the object you want to light, as wax or dirt can clog the flame nozzle and cause defects to the table lighter.

Stone table lighter

Press the button to ignite and hold to keep the flame. To turn off the table lighter simply release the button.

Sculpture table lighter

Press the button by simply ’squeezing’ the table lighter to ignite, hold your grip to keep the flame. To turn off the table lighter simply release the button/your grip.

Slim table lighter

Push the button upwards to ignite and hold to keep the flame. To turn off the table lighter simply release the button.

How to use the lighter

Video guide for the Stone table lighter

Video guide for the Sculpture table lighter

Video guide for the Slim table lighter

Which type of lighter gas is recommended

Use only quality butane gas – we recommend 100% pure butane gas, as this will not clog the nozzle in the table lighter. In addition, it is recommended that the table lighter is completely out of gas before refilling, as a mixture of different gas grades can cause the table lighter to burn uneven or not at all.

Refill of gas

Gas filling must be done outside or in a well-ventilated room and do not smoke at the same time.

It is best to refill the table lighter when it is completely empty. Press the filling valve with the tip of a pointed object until there is no more pressure in the table lighter. Then it is ready to be refilled.

Turn the adjusting knob as far down as possible (-). Hold the gas refill and table lighter straight above each other with the valve of the gas refill pointing vertically down at the table lighter. The table lighter’s filling valve is facing upwards. Then connect the gas refill valve to the corresponding opening in your mignis table light.

Press the gas refill with an even constant pressure and remove it after two seconds of filling – refill again for two seconds. Repeat this procedure if necessary. Wait approx. 1-2. minutes before using the table lighter again to let the excess gas evaporate. Now the table lighter is ready for use and the flame can be readjusted to the preferred level.

To avoid air to enter the sealed gas tank, please make sure the gas refill and the table lighter are held vertically during the filling process. This will prevent a potential vacuum of air that will affect the use of the table lighter.

Lighter gas is flammable and ice cold when it gets out into the air during filling – please be careful to keep away from your skin.

Refill gas

Video guide for the Stone table lighter

Video guide for the Sculpture table lighter

Video guide for the Slim table lighter

Adjustment of the flame

Keep the table lighter away from your face.

Adjust the flame by turning the adjusting knob to the left (+) for a larger flame and to the right (-) for a smaller flame.

Then turn on the table lighter to see if the flame height fits your preferred level.

How to adjust the flame

Video guide for the Stone table lighter

Video guide for the Sculpture table lighter

Video guide for the Slim table lighter

Cleaning and maintenance

Use a soft and damp cloth for cleaning. Do not use any detergents, chlorine or abrasives for cleaning, as the surface may be scratched.

Warning!

Keep out of reach of children.

Keep the table lighter away from your face, clothes and other people when in use.

Do not use the table lighter to light cigarettes, cigars and pipes.